• Fade effects during preset change: if 2 presets fade together, the effects in both presets will play
simultaneously during the fade. This requires extra CPU power and may be disabled if the Wolfmix
GUI is running slowly with lots of DMX channels.
• Show color preview on Preset: when enabled, up to 4 colored circles will be displayed on each preset
button to indicate the rst 4 colors used. Disable this option for a cleaner preset screen.
• Show Flash FX Screens: when enabled, an icon will be shown on the screen to indicate a Flash FX
has been triggered. The matrix and encoders can also be used to set Flash FX properties. Disable this
option to trigger Flash FX without leaving other screens. When disabled, the Flash FX screens can be
accessed by holding shift whilst hitting the Flash FX button.
• Switch group bank:
- When set to Shift + Tap - the group bank is toggled by hitting shift + BPM TAP.
- When set to BPM TAP - the operation of the BPM TAP button will be inverted. The group is toggled
by hitting BPM TAP without shift and the BPM is calculated with shift + BPM TAP.
• Retro mode sets the controllers color scheme to standard colors or Retro colors including green, and
orange.
• Quick Setup (beta): shows the Quick Setup button on the Fixtures screen. Quick Setup will search for
connected RDM xtures and add and address them automatically. RDM patching can only be achieve
through the 5-Pin DMX port, and non RDM compatible and RDM compatible can stop RDM signal
sent when connected.
41
To Next Page
Loading...
