Kick-Start Lever and Operation
If the battery becomes too weak to start the engine, use the
kick start lever to start the engine until the battery is serviced.
1. Position the vehicle on a level surface.
2. Shift the transmission into neutral (if equipped).
3. Lock the parking brake.
4. Push the engine stop switch up to the RUN position.
5. Turn the key ON.
6. Fold out the kick start lever and place your foot on the
lever. Thrust your heel downward to crank the engine.
7. After the engine has started, fold the kick-start lever into
place.
2.6
MAINTENANCE
FUEL SYSTEM AND AIR INTAKE
Fuel System Safety
To Next Page
Loading...
Need help?
General
