ENGINE / TRANSMISSION
Accessible Components
NOTE: The top-end of the engine can be serviced
without pulling the engine from the ATV. Loosen the
upper steering post mounting bolts to allow enough
clearance to remove cylinder head and cylinder.
However, it is recommended to pull the engine to
service top-end components.
The following components can be serviced or removed with the
engine installed in the frame:
• Flywheel
• Alternator/Stator
• Starter Motor/Starter Drive
• Oil pump
• Carburetor
• Transmission
The following components require engine removal for service
• Cylinder Head
• Cylinder
• Piston / Rings
• Crankshaft
• Crankshaft Main Bearings
• Crankcase
NOTE: Crankshaft components are not serviceable.
Replace crankshaft as an assembly.
4.4
To Next Page
Loading...
Need help?
General
