MAINTENANCE
Rear Suspension Inspection
Compress and release rear suspension. Damping should be
smooth throughout the range of travel.
• Check all rear suspension components for wear or damage.
• Inspect shock for leakage.
•Inspect the rear shock and spring to ensure proper function. If
the shock is leaking oil, replace it. Inspect the swing arm and
weldments for any sign of damage.
Suspension Spring Adjustment
The rear spring preload can be adjusted. The front spring
preload can be adjusted too.
To make preload adjustments, turn
the adjuster cam to increase or decrease the amount of preload.
BRAKE SYSTEM
Brake System Inspection
The following checks are recommended to keep the brake
system in good operating condition. Service life of brake
system components depends on operating conditions. Inspect
brakes in accordance with the maintenance schedule and
before each ride.
Brake Lever Travel
Check brake lever travel at the intervals recommended in the
Periodic Maintenance Chart. Service the brakes when brake
lever travel reaches the total lever travel measurement listed in
the table below. Always service the brakes when there is no
longer sufficient stopping ability at the specified lever travel
setting
To Next Page
Loading...
Need help?
General
