BODY / SUSPENSION / STEERING
Torque Specifications
Fastener Torque
Suspension Fasteners
A–Arm Attaching Bolt 34 Nm (25 ft. lbs.)
Shock Mounting Bolts Front: 34 Nm (25 ft. lbs.)
Rear: 49 Nm (36 ft. lbs.)
Swing Arm Mounting Bolt 88 Nm (65 ft. lbs.)
Steering Fasteners
Handlebar Adjuster Block 10 Nm (84 in. lbs.)
Inner Tie Rod Bolts 34 Nm (25 ft. lbs.)
Outer Tie Rod Bolts 34 Nm (25 ft. lbs.)
Steering Post Mount Nuts 22 Nm (16 ft. lbs.)
Steering Post Nut 54 Nm (40 ft. lbs)
Final Drive Fasteners
Front Wheel Spindle Nut 59 Nm (44 ft. lbs)
Rear Wheel Hub Nut 79 Nm (58 ft. lbs.)
Front / Rear Wheel Bolts 30 Nm (22 ft. lbs.)
Sprocket Bolts Front: 9.8 Nm. (87 in. lbs.)
Rear: 22 Nm (16 ft. lbs.)
Chain Tensioner Bolt 10 Nm (84 in. lbs.)
Bearing Carrier Mounting
Bolts
54 Nm (40 ft. lbs.)
Chain Guard Bolts 22 Nm (16 ft. lbs)
BODY REMOVAL
1. Lift up on the seat latch and remove the seat.
2. Remove the 4 screws of the fuel tank cover.
3. Remove the 2 screws and 4 insert rivets from 2 side panels.
4. Remove 2 side panels from front and rear cabs.
6.2
To Next Page
Loading...
Need help?
General
