AERMEC HMG - Receiving the Product

14
RECEIVING THE PRODUCT
Packaging label
Placed on the packaging, it shows the identification data of the
product.
Label example
Label example
Product identification
The technical plate is placed inside the unit and shows the
identification and technical data of the product.
CHECKS UPON RECEIPT
To avoid damage during transport, the units are completely
wrapped in packaging and protected by plastic elements.
It is recommended to maintain this protection during all
transport and lifting operations and not to remove the plastic
elements until commissioning.
Inside the electrical parts access panel you will find a document
envelope containing the following material:
• Instruction booklet for the installer and the Technical Service
with the declaration of conformity inside the first pages
• User manual of the unit
• Wiring diagrams
The instruction booklet is an integral part of the unit and there
-
fore it is recommended to retrieve it, to read it and to keep it
carefully. In case of loss, any duplicate is available in the support
area of the website www.aermec.com.
ATTENTION
Unit operating with slightly flammable and odorless
refrigerant: Upon receipt, it is necessary to check:
• Any refrigerant leaks with the aid of dedicated means and
tools.
• Check that the exterior has not been damaged in any way.
• Check that the lifting and transport devices are suitable for
the type of equipment and comply with the specifications
imposed in the transport and handling instructions enclosed
with this manual.
• Check that the accessories required for on-site installation
have been delivered and are functional.
• Check that the equipment supplied corresponds to the order
and the delivery note.
Product identification
Aermec products are identifiable by the packaging label
which shows the identification data of the product, and by the
technical plate which shows the technical performance and
identification data of the unit in your possession.
XXXXXXX
XXXXXXX_XX
XX
X XXXXXX XXXXXX
XXX kg
XXXXXXXXXXXXXXXX
XXXXXXXXX
XX/XXMPa
XXXX,XX t
XXX X,X kg
XXX kg
XXXXXXXXXXXXXXXX
XXX-XXV XX 00 Hz
00,0 kW
XX kW
XX kW
XX kW
XX kW
xxxxxxxxxxx
xxxxxxx_xx