20
Achievable with the aid of the TCP accessories (mandatory
accessory), IC-2P, VMF-485LINK and VMF-E6.
This type of modularity allows the integration of the HMG units to
the control system of the entire hydraulic / aeraulic system, also
allowing the management of domestic hot water.
The units are switched on and off in a sequential manner based
on a control logic that can be chosen between free regulation,
regulation by load and regulation by temperature difference.
For more information on the VMF system, refer to the dedicated
documentation.
In this mode of use it is possible to connect up to 4 HMG modules
together.
The management is optimized for systems in which each unit
controls its own pump.
SEQUENTIAL MODULARITY
VMF-485LINKVMF-485LINKVMF-485LINKVMF-485LINK
TCPTCPTCPTCP
HMG
modulo n. 4
HMG
modulo n. 3
HMG
modulo n. 2
HMG
modulo n. 1
To Next Page
Loading...
