17
UNIT TYPE FEATURES
MAIN COMPONENTS
• flow switch,
• DC brushless axial fans designed for aerodynamic
optimization, allowing a reduction in the noise level, but at
the same time, an increase in efficiency and air flow,
• twin rotary inverter compressor,
• special battery with golden fin coating,
• high efficiency shell and tube system side heat exchanger for
high reliability and durability over time,
• electronic expansion valve,
• equipped with base electric resistance to avoid the possible
formation of ice and favor the disposal of condensate during
heating operation.
ADJUSTMENT
Adjustment via touch screen control panel:
• management of (up to) two pumps (not supplied) that can
work alternately with consequent greater reliability of the
system,
management of (up to) two auxiliary electric heaters (not
supplied),
• quiet function for particularly quiet operation,
• climatic regulation function,
• antifreeze protection of the unit at low temperatures, weekly
programming in time bands,
• high and low pressure protections,
• intelligent control of the compressors that allows to extend
their useful life and improve the reliability of the unit,
• alarm history.
HMG0350
HMG0600
HMG is the new outdoor inverter reversible heat pump system
for the production of chilled and heated water.
These units have been designed to meet the installation needs
of residential and retail buildings or for industrial applications.
HMG consists of fully independent modules, that can be
connected to form a modular system.
The HMG unit is able to cool at any time during the year while
maintaining high energy efficiency.
It can be installed in newly built or renovated industrial and
residential buildings of various sizes such as hotels, residential
complexes, restaurants, buildings, shopping centres, theatres,
gyms and hospitals.
To Next Page
Loading...
