19
Achievable with the aid of a TCP control panel (mandatory
accessory) to be connected to the master unit of the system.
This type of modularity allows the modules to work with
homogeneous partitioning logic, while ensuring delayed
switching on and off to avoid peaks in electrical absorption and
intelligent defrosting (simultaneous defrosting of max 1/3 of the
modules present).
In this mode of use it is possible to connect up to 16 modules
together. To make the most of the features of this mode, it is
recommended to use it in systems with one pump (or group of
pumps) serving all the units. The control logic will manage the
switching on and off of the pump (or group of pumps) based on
the operating conditions of the generation system.
MODULARITY
HMG is a modular system of outdoor inverter reversible heat
pumps for the production of hot and chilled water, with
combinable basic modules specially designed to minimize the
overall dimensions. It is also possible to connect units of different
powers.
The modularity allows to adapt the installation of these units
to the actual development needs of the system, in this way
the installed power can be increased over time in a simple and
economical way.
Based on these needs, it is possible to choose between:
homogeneous modularity and sequential modularity.
HOMOGENEOUS MODULARITY
HMG
modulo n. 16
HMG
modulo n...
To Next Page
Loading...
