15
TRANSPORT AND HANDLING
The handling of the unit must be carried out by qualified per-
sonnel. Strictly follow the lifting instructions indicated with the
labels placed on the unit.
Each unit has undergone a series of stringent factory inspections
and tests to ensure expected performance and quality.
However, special care should be taken during handling and ship-
ping to prevent the units from being damaged.
The unit lifting operations must be carried out with extreme care
to avoid impacts on the frame, panels, electrical panel, etc.
NOTE: The units can be protected from damage during
transport by means of plastic elements. The machine is also
wrapped in packaging. It is recommended to maintain this
protection during all transport and lifting operations and
not to remove the plastic elements until commissioning.
If the unit includes anti-vibration mounts, they must be installed
before final positioning.
Checks upon receipt:
Upon receipt of the product, perform the following checks.
• Check that the equipment supplied corresponds to the order
and the delivery note.
• Check that the exterior has not been damaged in any way.
• Check that the lifting and transport devices are suitable for
the type of equipment and comply with the specifications
imposed in the transport and handling instructions enclosed
with this manual.
• Check that the documentation has been provided and is
complete.
• Check that the accessories required for on-site installation
have been delivered and are functional.
• If the unit is supplied pre-charged with refrigerant, check that
there have been no leaks.
• Check that, during transport, other substances, other than the
refrigerant used by the unit, have not entered the refrigera
-
tion system.
Handling example
ATTENTION
If the product is damaged, a registered letter with details
of the problem must be sent to the shipping company
within 48 business hours of delivery.
ATTENTION
After checking upon receipt, protect the unpackaged
units. Note that it is not recommended to unpack the
units too early to avoid unexpected damage.
To Next Page
Loading...
