Agilent Technologies 1290 Infinity II User Manual

1290 Infinity II High-Speed Pumps User Manual 264
12 LAN Configuration
What You Have to Do First
What You Have to Do First
The module has an on-board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The MAC
or hardware address of the LAN interfaces is a world wide unique identifier.
No other network device will have the same hardware address. The MAC
address can be found on a label at the rear of the module (see Figure 27 on
page 264).
Figure 26 MAC-Label
2 Connect the instrument's LAN interface (see Figure 27 on page 264) to
• the PC network card using a crossover network cable (point-to-point) or
• a hub or switch using a standard LAN cable.
Figure 27 Location of LAN interface and MAC label
Revision Code, Vendor, Year and Week of assembly
Part number of the pump main board
MAC address
Country of Origin
LAN interface
MAC label

Agilent Technologies 1290 Infinity II Specifications

General

Brand	Agilent Technologies
Model	1290 Infinity II
Category	Laboratory Equipment
Language	English