Agilent Technologies 1290 Infinity II User Manual

1290 Infinity II High-Speed Pumps User Manual 70
3Using the Pump
Setting up the Pump with the Instrument Control Interface
Control Settings
The pump control parameters are in two sections:
•Pump
•Automatic Turn On
Table 10 Pump control parameters
Parameter Description
Pump Enables you to switch the pump On, Off or to a Standby condition.
In the Standby condition, the pump motor is still active, and when the pump is switched on again, it
does not need to be re-initialized.
Automatic Turn On Module can be turned on at a specified date/time. This feature can only be used if the module power
switch is turned on.

Agilent Technologies 1290 Infinity II Specifications

General

Brand	Agilent Technologies
Model	1290 Infinity II
Category	Laboratory Equipment
Language	English