1290 Infinity II High-Speed Pumps User Manual 28
2 Site Requirements and Specifications
Performance Specifications
Composition precision <0.15 % RSD or 0.01 min SD,
whichever is greater
Composition accuracy ±0.35 % absolute
Number of solvents 2 out of maximum 26 solvents
Solvent selection valve Internal 4-solvent selection
valve included.
External 2x 12 solvent valve as
option, fully integrated in the
pump control interface.
Integrated degassing unit Number of channels: 2
Internal volume per channel:
1.5 mL
Materials in contact with sol-
vent
TFE/PDD copolymer, FEP,
PEEK, PPS, stainless steel, poly-
imide
Automatic purge valve Included
Active Seal Wash Included
Intelligent System Emulation
Technology (ISET)
Included
Instrument control LC & CE Drivers A.02.11 or
above
Instrument Control Framework
(ICF) A.02.03 or above
InfinityLab LC Companion
(G7108AA) with firmware
D.07.25 or above
Instant Pilot (G4208A) with firm-
ware B.02.17 or above
Lab Advisor software B.02.06 or
above
For details about supported
software versions refer to the
compatibility matrix of your ver-
sion of the LC & CE Drivers
Communication Controller Area Network (CAN),
RS232C, APG remote: ready,
start, stop, and shutdown sig-
nals, LAN
Table 3 Performance Specifications G7120A
Type Specification Comments
To Next Page
Loading...
