Contents
x Measurements Reference Guide
Agilent 10769A Beam Steering Mirror 11-8
Agilent 10767B Lightweight Retroreflector 11-8
Agilent 10744A Accessory Kit 11-8
Setting Up for the Measurement 11-10
Calculating Angles 11-11
Placing and Using the Sensors 11-11
Assembling the Interferometer, Reference Retroreflector
and Beam Steering Arm 11-12
Assembling the Interferometer, Post, Base and
Clamp 11-17
Assembling the Measurement Retroreflector and Ball-
Joint 11-19
Agilent 10767A Linear Retroreflector 19
Agilent 10767B Lightweight Retroreflector 19
Installing and Aligning the Optics on the
Machine 11-21
Installing the measurement optics on the machine 22
Mounting the interferometer assembly on the machine
table 22
Installing the measurement retroreflector 25
Installing and initially aligning the laser head 26
Aligning the beam to the XY plane diagonal (azimuth angle,
α) of the measurement 27
Aligning the beam to the elevation angle (β) of the
measurement 29
Making Your Measurement 11-31
Aligning for the Second Diagonal in the Same
Plane 11-34
Analyzing your data 11-35
Slant-Bed Lathe 11-39
Basics 11-42
Characteristics 11-51
To Next Page
Loading...
