22 Operation Manual
1 Introduction
Safety and Regulatory Certifications
Electromagnetic compatibility
This device complies with the requirements of CISPR 11.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try one or more
of the following measures:
1 Relocate the radio or antenna.
2 Move the device away from the radio or television.
3 Plug the device into a different electrical outlet, so that the
device and the radio or television are on separate electrical
circuits.
4 Make sure that all peripheral devices are also certified.
5 Make sure that appropriate cables are used to connect the
device to peripheral equipment.
6 Consult your equipment dealer, Agilent Technologies, or an
experienced technician for assistance.
Changes or modifications not expressly approved by Agilent
Technologies could void the user’s authority to operate the
equipment.
Sound emission declaration
Sound pressure
Sound pressure Lp < 70 dB according to EN 27779:1991 and
EN ISO 3744:1995.
Schalldruckpegel
Schalldruckpegel LP < 70 dB nach EN 27779:1991 und EN ISO
3744:1995.
To Next Page
Loading...
Need help?
General
