52 Agilent 1290 Infinity II Flexible Pump User Manual
6 Error Information
Agilent Lab Advisor Software
Defect connection between main board and pump drive encoder 67
Pump drive encoder defect 68
Multi Purpose Valve failed 68
Reading of multi purpose valve tag failed 69
Pump drive encoder rollover 69
Drive position limit 70
Insufficient power of drive encoder LED 70
Drive encoder error 70
Writing the multi purpose valve tag failed 71
Unknown multi purpose valve type 71
Pump drive encoder error 71
Pump drive error 72
Maximum stroke is too short 72
Pump drive stop not found 73
Timeout: Wait for Composition 73
Timeout: Wait for run volume 74
Timeout: Wait for Volume 74
Timeout: Wait for Flow 75
Timeout: Wait for Pressure 75
Drive Encoder failed 76
Drive phases differ too much in electric resistance 76
Degasser's pressure limit violation 77
Seal wash pump was missing when tried to turn on 77
Valve hardware overcurrent (MCGV) 78
This chapter describes the meaning of error messages, and provides
information on probable causes and suggested actions how to recover from
error conditions.
To Next Page
Loading...
Need help?
General
