Page 18 VK 7025 Dissolution Apparatus Revision H, 11/10
Introduction Operator’s Manual P/N 70-9033
Varian, Inc.
Quick Key Guide
Screen Saver
The VK 7020 / 7020 S / 7025 screen saver initiates after 30 minutes of inactivity and no
program running. Press any key to reactivate the dissolution apparatus.
If security has been disabled, the last screen displays.
If security has been enabled, a screen requesting the current user’s password displays.
Enter the password and press ENTER. The last screen displays.
ESC Press ESC to return to the previous screen.
MENU From any point after the Main Menu, press MENU to return to the
Main Menu.
ENTER After entering any input, press ENTER to complete the process.
STOP / PAUSE Press STOP / PAUSE to pause or abort the present program.
RUN To manually begin operations that were not programmed to delay
start, press RUN.
CLEAR Press CLEAR to instantly clear an entry.
DRIVE UP Press DRIVE UP to raise the drive unit. The drive unit
automatically rises to the home position unless another key is
pressed. Pressing DRIVE UP or DRIVE DOWN stops the upward
movement of the drive unit.
DRIVE DOWN Press and hold DRIVE DOWN to lower the drive unit. Release
the key when the drive unit is in the appropriate position.
To Next Page
Loading...
Need help?
General
