Agilent Technologies Varian VK 7025 - Method Editor Functions

Page 84 VK 7025 Dissolution Apparatus Revision H, 11/10
Operation Operator’s Manual P/N 70-9033
Varian, Inc.
Method Editor
From the Main Menu, select METHOD EDITOR. The Method Menu screen displays. You
can view the method, but only those with appropriate security levels can change
information in this section. The Method Menu screen displays the following options:
Modify Method (see “Creating / Modify Method” below), Copy Method (see “Copying
Methods” on page 89) and Store Method (see “Storing Methods” on page 90).
Creating / Modify Method
To create a new method or modify an existing method, complete the following steps:
Step 1. From the Method Menu screen, select MODIFY METHOD to display the
Select Method Location to Modify screen.
Step 2. Scroll up or down the list by selecting NEXT or PREVIOUS until the
correct method number is highlighted.
Step 3. Select SELECT. If no method exists, scroll through the list until the
desired method location is highlighted and select SELECT. The Method
Menu 1 screen displays.
Following is a description of the Method Menu 1 screen options:
Option Response
Method Select METHOD to name the method. The cursor flashes. Enter the
desired name and press ENTER. The method name displays.
Apparatus Select APPARATUS to change the apparatus being used for the test.
See “Apparatus” on page 61.
RPM Set Select RPM SET to set the speed in rotations per minute. See “RPM
Set” on page 61.
Bath Temperature
Set Point
Select BATH TEMPERATURE SET POINT to set the water bath
temperature in degrees Celsius. See “Bath Temperature Set Point” on
page 61.