Revision H, 11/10 VK 7025 Dissolution Apparatus Page 55
P/N 70-9033 Operator’s Manual Administrator Operation
Varian, Inc.
Menu 2
From the System Setup Menu 1 screen, select MENU 2. The System Setup Menu 2
screen displays.
Following is a description of the System Setup Menu 2 screen options:
Option Response
Clock Select CLOCK to set the date, time, and date format. See “Setting
the Clock” on page 56.
Comm. Port
Functions
Select COMM. PORT FUNCTIONS to set the baud rate,
communication port, and external control. The Comm. Functions
screen displays. See “Setting Communication Port Functions” on
page 56.
Serial Numbers Select SERIAL NUMBERS to enter the serial numbers of
equipment being used. See “Setting Serial Numbers” on page 57.
Vessels Select VESSELS to select the number of vessels being used.
Note: it is imperative to set the correct number of vessels
being used or the instrument will not function properly.
All Position Spin Select ALL POSITION SPIN to toggle between
ENABLED and
DISABLED. When disabled, the paddles or baskets rotate only when
the drive unit is at the correct operating height.
When enabled, the paddles or baskets rotate when the drive unit is
at any height.
Tester ID Select TESTER ID to enter an identification number for the
dissolution apparatus. This number appears with the dissolution
apparatus serial number on the printout.
Dly After Ini Tmp Select DLY AFTER INI TMP to enter a delay duration between the
measuring of the initial temperature and the DDMs opening.
To Next Page
Loading...
Need help?
General
