Revision H, 11/10 VK 7025 Dissolution Apparatus Page 73
P/N 70-9033 Operator’s Manual Operation
Varian, Inc.
Start Method
From the Main Menu, select START METHOD. The Start Method screen displays.
Following is a description of the Start Method screen options:
Note
Methods are not write-protected. Check with other users before
proceeding.
Option Response
Select Method Use this option to enter a number between 1 and 23 corresponding to the
method desired. This is most easily achieved by using List Methods (see
below).
If a previous method has been selected, the method number displays
next to CURRENT and the method name displays next to METHOD. If a
different method is required, select SELECT METHOD. The cursor
flashes next to CURRENT.
Enter the method number and press ENTER. The method name displays
next to METHOD.
If no method exists, see “Creating / Modify Method” on page 84 to create
a method.
List Methods Use this option to display a list of the methods stored on the VK 7025 in
order to select a specific method.
To list the currently available methods by number and name, select LIST
METHODS. The Select Method to Load screen displays.
Scroll up or down the list by selecting NEXT or PREVIOUS.
When the correct method is highlighted, select SELECT. The Start
Method screen displays with the new method number and name in place.
If no method exists, see “Creating / Modify Method” on page 84 to create
a method.
To Next Page
Loading...
Need help?
General
