Page 42 VK 7025 Dissolution Apparatus Revision H, 11/10
Setup Operator’s Manual P/N 70-9033
Varian, Inc.
Step 10. Determine the security level for the new user by selecting
ADMINISTRATOR, SUPERVISOR, or OPERATE ONLY. The
Administration screen displays.
Step 11. Repeat steps 6 - 10 until all users’ identifications, passwords, and
security levels have been entered.
Step 12. Delete the preprogrammed user identification and password that came
with your dissolution apparatus (see “Deleting Preset User Definitions”
below).
Deleting Preset User Definitions
It is recommended that you immediately change the user identification and password for
Administrative control of the VK 7025 Dissolution Apparatus once your unit is installed.
Step 1. After entering the user identifications, passwords, and security levels,
select LIST / DELETE USERS. The List and Delete Users screen
displays.
Step 2. Select the preset user identification and password by selecting NEXT
until the cursor flashes over the number of the appropriate user
identification.
Step 3. Select DELETE.
Step 4. Select YES to confirm deletion. The List and Delete Users screen
displays.
Step 5. Press ESC to return to the Administration screen.
To Next Page
Loading...
Need help?
General
