Aiphone IX SERIES User Manual

109
Settings and Adjustments
Configuring on the station
4
■ Call Button
Configure the ringtone for each priority when a call is received by the call button. This can be configured for
each source station. Refer to
“How to configure the Ringtone (→page 112)” for how to configure this.
■ Option Input
Configure the ringtone for each priority when a Option Input call is received. This can be configured for each
source station. Refer to “How to configure the Ringtone (→page 112)” for information on how to configure this.
Entry Description Settings Default values
Ringtone Select the ringtone for incoming call.
Ringtone can be set per each source
station.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom
Sound Registry
(→page 172)”.
Call Button: Call
Pattern 1
Option Input: Call
Pattern 2

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom