Aiphone IX SERIES - Page 155

155
Settings and Adjustments
Configuring on the station
4
How to assign Relay Control functions to Speed Dial buttons
(1) On the Speed Dial Settings screen, tap [Relay Control].
– The Set Destination Relay screen will be shown.
(2) Configure detailed settings.
Entry Description Settings Default values
TIMER (Relay Control
Settings)
Select the Output Time Range for relay output,
and set the Timer within the range.
• Momentary: The relay
continues to output
when the Speed Dial
button is pressed.
Pressing the Speed Dial
button again stops relay
output.
• 200 to 2000 msec:
Select this to set a time
between 200 and 2000
msec (by 200 msec).
Enter the time in "Relay
Control Settings."
• 3 to 600 sec: Select this
to set a time between 3
and 600 sec (by 1 sec).
Enter the time in "Relay
Control Settings."
Momentary