Aiphone IX SERIES - Page 175

175
Settings and Adjustments
Station programming
4
*1 Indicates a required field. Use the default values, unless a change is necessary.
■ Call Origination Settings (outgoing call placed by Option Input 1 - 4)
*1 Indicates a required field. Use the default values, unless a change is necessary.
Ringback Tone Count
[time(s)]
Set the play count of ringback tone for outgoing
call.
• 1 - 20 times
• Infinite: The calling tone
continues to play for the
amount of time set in
"Call Timeout."
Infinite
Note
• When calling a VoIP Phone, this will be the shorter time of the time set for "Call Timeout" and the call duration configured on
the IP-PBX.
Entry Description Settings Default values
Ringback Tone Select the sound to be played by the station
when placing a call. via option input.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom
Sound Registry
(→page 172)”.
Call Pattern 4
Call Timeout
*1
Configure the call timer for calls. • 10 - 600 sec: Select to
set between 10-600 sec
(by 1 sec).
• Infinite: Keep calling
until call is answered.
60sec
Ringback Tone Count
[time(s)]
Set the play count of ringback tone for outgoing
call.
• 1 - 20 times
• Infinite: The calling tone
continues to play for the
amount of time set in
"Call Timeout."
Infinite
Call Destination Configure the outgoing call destination group. 01 - 99 -
Priority Set the priority of calls. • Normal
• Priority
• Urgent
Normal
Entry Description Settings Default values