222
Settings and Adjustments
Station programming
4
Communication
*1 Indicates a required field. Use the default values, unless a change is necessary.
Entry Description Settings Default values
Talk Timeout [sec]
*1
Set the communication timer when placing a
call or answering a page. Communication timer
when receiving a call is set at the destination
station.
• Infinite: No timeout.
• 30-600 sec: Configure
between 30 to 600 sec
(by 1 sec).
60sec
Force Touch-to-Talk Select Enable / Disable for Force Touch-to-Talk
when starting communication in hands-free
mode.
• Enable
• Disable
Disable
Important
• When on a call with a VoIP Phone, this will be the call duration configured on the VoIP Phone.
To Next Page
Loading...
