42
How to use
Placing / Answering a Call
3
Note
• Depending on the configuration, the ringtone may be heard
from a separately installed speaker or other device.
• If the call duration configured on the other station (for calls
with a VoIP phone, the call duration configured on the VoIP
phone) elapses, the call will automatically end. A
notification tone will play approximately 10 seconds prior to
the call ending. The notification tone may not play,
depending on the settings.
• If a page with a higher priority is received from another
station during communication, the call will be interrupted
and the station will switch to the page.
• If a page or a call with a higher priority is received from
another station while receiving a call, the station will switch
to the page or call with a higher priority.
• The ringtone may not sound, depending on the
configuration.
• Tap during a call to turn off the microphone and
camera of the station. Tap to turn them back on.
• When receiving two or more calls simultaneously, tap
to choose the station to communicate with.
(→page 74)
• When Auto Answer
(→page 110) is "ON," an individual call
from another Master Station will be answered
automatically. It will not automatically answer a group call
or a call from a handset sub station or Door Station.
To Next Page
Loading...
Need help?
General
