Aiwa NSX-430 - SPECIFICATIONS; FM section; MW section; LW section

SPECIFICATIONS
<FM section>
Frequency range
Usable sensitivity (IHF)
Alternate channel selectivity
Signai-to-noise ratio
Harmonic distortion
Frequency response
Stereo separation
Antenna
<MW section>
Frequency range
Usable sensitivity
Selectivity
Signai-to-noise ratio
Antenna
<LW section>
Frequency range
Sensitivity
Antenna
<Timer section>
Program timer
Sleep timer
<Amplifier section>
Power output
Harmonic distortion
Input terminal
Output terminal
<Cassette deck section>
Track format
Frequency response
Signal-to-noise ratio
Tape speed
Recording system
Erasure system
Motor
Heads
74
87.5 MHz to 108 MHz
Except EZ: 1.3 wV (75 ohms) 13.2
dBf
EZ: 1.9 pV (75 ohms) 16.8 dBf
50 dB (+400 kHz)
STEREO: 70 dB (Except EZ)
65 dB (EZ)
MONO: 76 dB (Except EZ)
73 dB (EZ)
0.3 % (MONO), 1 KHz
0.5 % (STEREO, L-R), 1 kHz
30 Hz to 15 kHz (+0.5 dB, — 3 dB)
33 dB at 1 kHz
75 ohms (unbalanced)
531 (530) kHz to 1602 (1710) kHz
350 uV/m
22 dB (9 kHz)
53 dB (100 dB input)
Loop antenna
144 kHz to 290 kHz
1400 nV/m
Loop antenna
On-timer, free setting
Setting in 10-minute increments,
240 minutes maximum
CX-N430 EE, EZ: 30 W + 30 W
(6 ohms, T.H.D. 1% 1 kHz)
CX-N430 K: 30 W + 30 W
(6 ohms, T.H.D. 1% 1 kHz)
42W+42W
(6 ohms, T.H.D. 10 % 1 kHz)
0.05 % (15 W, 1 kHz, 6 ohms)
VIDEO/AUX: 150 mV (adjustable)
MIC: 1.8 mV/10 kQ
SUPER WOOFER: 1.3 V
4 tracks, 2 channels
CrOz tape: 50 — 16000 Hz
Normal tape: 50 ~— 15000 Hz
60 dB (DOLBY NR ON, CrOz tape
peak level)
4.8 cm/sec. (17/s ips)
AC bias
AC erase
DC servo motor x 1
Playback head x 1 (deck 1)
Recording/playback/erasure head
x 1 (deck 2)
<CD player section>
Disc Compact disc
Scanning method Non-contact optical scanner (semi-
conductor laser)
Laser Semiconductor laser (A = 780 nm)
Rotation speed Approx. 500 rpm — 200 rpm (CLV)
Error correction Cross Interleave, Reed Solomon
code
No. of channels 2 channels
D-A conversion 1-bit linear
Wow/flutter Unmeasurable
Signal-to-noise ratio
Harmonic distortion
90 dB (1 kHz, 0 dB)
0.05% (1 kHz, 0 dB)
<Speaker system>
(These values are for one speaker.)
Cabinet type 3 way, bass reflex with surround
speaker (magnetism sealed type)
Speaker 130 mm (5'/sin.) cone type woofer
80 mm (3'/s in.) cone type tweeter
50 mm (2 in.) ceramic type super
tweeter
80 mm (31/4 in.) surround speaker
Impedance 6 ohms :
Surround speaker: 16 ohms
Music power 40 W (Surround speaker: 20 W)
Output sound pressure level 87 dB/W/m
Dimensions (W x H x D) 206 x 302 x 260 mm
(8'/e x 12 x 10%/s in.)
Weight 3.5 kg (7 Ibs. 11 02)
<Common section>
Power requirements CX-N430 EE, EZ:
AC 230 V, 50 Hz
CX-N430 K:
AC 230-240 V, 50 Hz
Power consumption 200 W
(System total)
Dimensions (W x H x D) Main unit:
260 x 305 x 340 mm
(10%/4 x 12/8 x 1312 in.)
System:
672 x 305 x 340 mm
(261/2 x 12s x 13'/2 in.)
Main unit: 6 kg (13 Ibs.4 oz)
System: 13 kg (28 Ibs. 11 0z)
FM unipolar antenna (1)
MW/LW loop antenna (1)
Surround speaker cord (2)
Remote control (1)
Weight
Accessories
Specifications and external appearance subject to change without
notice.
¢ Dolby noise reduction manufactured under license fromm Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol 00 are trademarks of Dolby
Laboratories Licensing Corporation.
* The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
COPYRIGHT
Please check the laws on copyright relating to recordings forn discs,
radio or external tape for the country in which the machine is being
used.