R28 Door Phone Administrator Guide
•
PCAP: click the start tab and Stop tab to capture a certain range of data packets
before clicking the Export tab to export the data packets to your Local PC.
•
PCAP Auto Refresh: select Enable or Disable to turn on or turn off the PCAP auto
fresh function. If you set it as Enable then the PCAP will continue to capture data
packets even after the data packets reached their 1M maximum in capacity. If you
set it as Disable, the PCAP will stop data packet capturing when the data packet
captured reached the maximum capturing capacity of 1MB.
•
New PCAP: click start to capture a bigger data package.
To Next Page
Loading...
Need help?
General
