Akuvox R28 Series Administrator's Guide

R28 Door Phone Administrator Guide
www.akuvox.com
33
• Password: enter the password obtained from the SIP account administrator.
10.2.2 SIP Server Configuration
SIP servers can be set up for devices in order to achieve call sessions through SIP servers
between intercom devices. To do this configuration also on web Account > Basic > SIP
Server interface.
Parameter Set-up:
• Server IP: enter the primary server IP address number or itsURL.
• Server IP: enter the backup SIP server IP address or itsURL.
• Port: set up SIP server port for data transmission.
• Registration Period: set up SIP account registration time pan. SIP re-registration will
start automatically if the account registration fails during the registration time span.
The default registration period is 1800, ranging from 30-65535s.
10.2.3 Configure Outbound Proxy Server
An outbound proxy server is used to receive all initiating request messages and route them
to the designated SIP server in order to establish a call session via port-based data
transmission. To set it up on the device web Account > Basic > Outbound Proxy Server
Interface.

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English