Akuvox R28 Series Administrator's Guide

R28 Door Phone Administrator Guide
www.akuvox.com
95
21 Auto-provisioning
Configurations and upgrading on the Akuvox door phone can be done on the web interface
via one-time auto-provisioning and scheduled auto-provisioning via configuration files,
thus saving you from setting up configurations needed one by one manually on the door
phone.
21.1 Provisioning Principle
Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party
servers. DHCP, PNP, TFTP, FTP, and HTTPS are the protocols used by the Akuvox
intercom devices to access the URL of the address of the third-party server which stores
configuration files and firmware, which will then be used to update the firmware and the
corresponding parameters on the door phone.
21.1.1 Configuration Files for Auto-provisioning
Configuration files have two formats for auto-provisioning. One is general configuration
files used for the general provisioning and another one is the MAC-based configuration
provisioning.
The difference between the two types of configuration files is shown below:

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English