R28 Door Phone Administrator Guide
21.4
Static Provisioning Configuration
You can manually set up a specific server URL for downloading the firmware or
configuration file. If an Autop schedule is set up, the door phone will perform the auto-
provisioning at a specific time according to Autop schedule you set up. In addition, TFTP,
FTP, HTTP, and HTTPS are the protocols that can be used for upgrading the device
firmware and configuration.
Parameter Set-up:
•
URL: set up TFTP, HTTP, HTTPS, and FTP server addresses for the provisioning.
•
User Name: set up a user name if the server needs a user name to be accessed
otherwise leave it blank.
•
Password: set up a password if the server needs a password to be accessed
otherwise leave it blank.
•
Common AES Key: set up AES code for the intercom to decipher the general Auto
Provisioning configuration files.
•
AES Key (MAC): set up AES code for the intercom to decipher the MAC-based auto
provisioning configuration file.
To Next Page
Loading...
