R28 Door Phone Administrator Guide
8 Volume and Tone Configuration
Volume and tone configuration in the Akuvox door phone refers to the microphone volume,
speaker volume, temper alarm volume, ringback tone, and open-door tone configuration.
Moreover, you can upload the tone you like to enrich your personalized user experience.
8.1
Volume Configuration
To set up the volumes, you can set them up on the device web Phone > Audio > Volume
Control > interface.
Parameters Set-up:
•
Mic Volume: adjust the mic volume as needed.
•
Volume Level: control the volume of all speakers. The default is 1, the first level of
volume, the volume range is roughly 80-95, and 2 is the second level of volume, the
volume range is roughly 95-109.
•
Speaker Volume: adjust the speaker volume as needed.
•
Tamper Alarm Volume: adjust the volume of the tamper alarm.
•
Keypad Volume: adjust the volume of the keypad.
•
Tamper Alarm Volume: set the tamper alarm volume from 1-15 according to your
need. The default volume is 8.