Akuvox R28 Series Administrator's Guide

R28 Door Phone Administrator Guide
www.akuvox.com
62
Parameter Set-up:
• AES Key For Import: enter the AES code before importing the AES-encrypted .tgz file
to the door phone.
14.9 Configure Open Relay via HTTP for Door Unlock
You can open the door from a third-party device using the Akuvox HTTP command (URL)
which triggers a door phone relay for the door opening. Also, you can type in an HTTP
command on a browser to open the door using the HTTP command remotely. To
configure it, go to Intercom > Relay > Open Relay Via HTTP.
Parameter Set-up:
• Enabled: enable the HTTP command to unlock the function by clicking on Enable.
• Session Check: this feature is for some network security limitations, if you enable it,
the door may not be unlocked in this way.
• User Name: enter the user name of the device's web interface, for example, Admin.
• Password: enter the password for the HTTP command. For example,12345.

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English