Akuvox R28 Series Administrator's Guide

R28 Door Phone Administrator Guide
www.akuvox.com
68
15 Security
15.1 Tamper Alarm Setting
The tamper alarm function serves as a protection against any unauthorized removal of the
devices by triggering off the temper alarm while sending out calls to the designated
location. Tamper alarm will be triggered off when the door phone changes its gravity value
as opposed to its original gravity value set up when the device is installed. To do this
configuration on the web Security > Basic > Tamper Alarm.
Parameter Set-up:
• Enabled: enable the anti-theft alarm function.
• Gravity Sensor Threshold: set the threshold for the gravity sensory sensitivity. The
lower the value is, the higher the value will be. The gravity sensor value is 32 by
default.
• Trigger Options: select what can be triggered when the gravity sensor is triggered.
15.1.1 Client Certificate Setting
Certificates can ensure communication integrity and privacy when deploying the Akuvox
door phone. So, when the user needs to establish an SSL protocol, it is necessary to
upload corresponding certificates for verification.

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English