Akuvox R28 Series Administrator's Guide

R28 Door Phone Administrator Guide
www.akuvox.com
37
10.3.4 Sequence Call
Sequence call is used to initiate multiple numbers from one family in Akuvox SmartPlus
one by one. If the previous callee does not answer within the sequence call timeout, the
call will be transferred to the next one. If the call is answered by one of the callees, the call
will not be transferred anymore. This feature is only available when connecting to the
Akuvox SmartPlus. To do the configuration on the web Intercom > Basic > Manager
Dial interface.
Parameters Set-up:
• Call Type: select Sequence Call.
• Call Timeout (Sec): set the call timeout before calling the next called party when the
first called party does not receive the call within thetimeout.
• When Refused: if you select Do Not Call Next, then the sequence call will be
terminated if the call is rejected by the called party. If you select Call Next then the
sequence call will be continued to the next called party if it is rejected by the first
called party.

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English