R28 Door Phone Administrator Guide
10.3.5
Web Call
In addition to making IP/SIP calls directly on the device, you can also make the call on the
device web interface without approaching to device physically for testing purposes, etc. To
do the configuration on the web Intercom > Basic > Web Call interface.
Parameters Set-up:
•
Auto/Account1/Account2: to choose a suitable SIP account to make a web call. If
you call using an IP address, Account selection is not needed here.
10.3.6
Dial Plan
If you want to replace the long and complex dial number with a shorter number that can be
memorized at greater ease and convenience for making calls. You can replace multiple
device dial numbers such as IP addresses with only one short number. To configure the
number replacement on the device, navigate to Phone > Dial Plan, then click Add. To
replace the number in batch, you can import the .xml file to the door phone. And the file
from the door phone can be exported out before importing them to other door phones.