R28 Door Phone Administrator Guide
6.2
Time Setting
Time setting on the web Phone > Time/Lang > Time interface allows you to set up time
and date manually while allowing you to use the NTP server address that you obtained to
automatically synchronize your time and date. And when your time zone is selected, the
device will automatically notify the NTP server of its time zone so that the NTP server can
synchronize the time zone setting in your device. To set up the device time, go to Phone >
Time/Lang> Time.
Parameter Set-up:
•
Time Format: select 12-hour time format or 24-hour timeformat.
•
Date Format: select data format: Y-M-D, M-D-Y, or D-M-Y.
•
Manual/Auto: you can choose automatically to gain the time or manually configure
the date and time.
•
Date: it is available when you choose Manual. Setup the year, month, and day
according to your need.
•
Time: it is available when you choose Manual. Set up the hour, minute, and second
according to your need.
•
Time Zone: it is available when you choose Auto. Select the specific time zone
depending on where the device is used and then press Confirm tab for the
confirmation. The default time zone is GMT GMT+0.00.
To Next Page
Loading...
Need help?
General
