Akuvox R28 Series Administrator's Guide

R28 Door Phone Administrator Guide
www.akuvox.com
20
• PromptVolume: adjust the prompt volume, which includes various types of prompt
sound for door open success and failure, ringback, temperature measurement sound,
etc.
8.1.1 Open Door Tone Configuration
You can not only enable or disable the Open Door Tone but also controls the prompt words
that accompany the tone on the web Phone > Audio > Open Door Warning interface.
Parameters Set-up:
• Open Door Inside Tone: enable it so that you can hear the open door tone when you
open the door by pressing the exit button.
• Open Door Outside Tone: enable it so that you can hear the open door tone when you
open the door using the access method on the door phone.
• Open Door Failed Tone: enable it so that you can hear the open door failure tone
following the open door failure.
8.2 Upload Tone Files
You can configure the door phone ringback tone and other tones related to the door
opening.
8.2.1 Upload Open Door Tone and Ringback Tone
You can customize the tone of door open successful/failed if you need. The outside tone
is used to open the door via card or DTMF or PIN code. The inside tone is used to open the

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English