R28 Door Phone Administrator Guide
10.2.1
SIP Account Registration
Akuvox door phones support two SIP accounts that can all be registered according to your
applications. You can, for example, switch between them if any one of the accounts failed
and become invalid. The SIP account can be configured on the device interface.
10.2.1.1
Configure SIP Account Configuration
To perform the SIP account setting on the Web Account > Basic > SIP Account Interface.
Parameter Set-up:
•
Status: check to see if the SIP account is registered or not.
•
Account: select the exact account (Account 1&2) to be configured.
•
Account Enabled: click Enable or Disable to activate or deactivate the registered SIP
account.
•
Display Name: configure the name, for example, the device’s name to be shown on
the device being called to.
•
User Name: enter the user name obtained from the SIP account administrator.
•
Display Label: configure the device label to be shown on the device screen.
•
Register Name: enter the SIP account register Name obtained from the SIP account
administrator.
To Next Page
Loading...
Need help?
General
