R28 Door Phone Administrator Guide
Parameter Set-up:
•
HTTP API: select Enable or Disable to enable or disable the HTTP API function for
the third-party integration. For example, if the function is disabled, any request to
initiate the integration will be denied and HTTP 403 forbidden status will be returned.
•
Auth Mode: select among four options: None, WhiteList, Basic, and Digest for
authorization type, which will be explained in detail in the following chart.
•
User Name: enter the user name when Basic and Digest authorization mode is
selected. The default user name is Admin.
•
Password: enter the password when Basic and Digest authorization mode is
selected. The default user name is Admin.
•
IP01-IP05: enter the IP address of the third-party devices when the WhiteList
authorization is selected for the integration.
Please refer to the following description for the Authentication mode
No authentication is required for HTTP API as it
is only used for demo testing.
To Next Page
Loading...
Need help?
General
