R28 Door Phone Administrator Guide
Parameters Set-up：
•
Contact: you can choose to show all contact information or one group's contact
information.
•
Contacts short by: there are three options ASCII Code, Room Number, and Import. If
ASCII Code is selected, sort in ascending ASCII order, for example, 0-9, a-z, numbers
take precedence over letters. Not case sensitive, but the same letter, lowercase is
sorted before uppercase. If Room Number is selected, sort by room name. If there is
no room name, the room number is taken as the room name by default. The room
number is available after enabling Cloud contact. If Import is selected, sort by
contacts in the imported file.
•
Show Cloud Contacts Enabled: if enabled, the contacts synchronized from the
SmartPlus cloud can be displayed.
•
Caller Display: select Name, then the contact name of the incoming call will be
displayed. If the contact is not in your contact list, the SIP/IP number will be
displayed for the incoming call. Select None, then only the Talking and talking time
duration is displayed. Select Group, then the contact group name will be displayed,
but if the contact is not in the contact list, then IP or SIP number will be displayed.
•
Search: enter the key number or key letter of the name to quickly search the contact.
•
Dial: enter a phone number then click Dial to initiate the call from the web.
To Next Page
Loading...
Need help?
General
