R28 Door Phone Administrator Guide
Parameter Set-up:
•
Type: select among three options Disabled, Web Relay, and Both. Select Web relay
to enable the web relay. Select Disable to disable the web relay. Select Both to
enable both local relay and web relay.
•
IP Address: enter the web relay IP address provided by the web relay manufacturer.
•
User Name: enter the user name provided by the web relay manufacturer.
•
Password: enter the password provided by the web relay manufacturer. The
passwords are authenticated via HTTP and you can define the passwords using http
get in Action.
•
Web Relay Action: enter the specific web relay action command provided by the web
manufacturer for different actions by the web relay. Without adding IP, username,
pwd, you can fill in the HTTP command in the web relay action, so you can configure
multiple web relays.
•
Web Relay Key: it can be null or enter the configured DTMF code, when the door is
unlocked via the DTMF code, the action command will be sent to the web relay
automatically.
To Next Page
Loading...
Need help?
General
