Alcatel-Lucent 7210 SAS M - Page 108

Page 108 7210 SAS M, T, X, R6 Basic System Configuration Guide
File Commands
To FTP a file named 121201.cfg in directory mydir stored on cf1 to a network FTP
server with IP address 131.12.31.79 in a directory called backup with a destina-
tion file name of 121201.cfg, the FTP syntax is:
copy /mydir/121201.cfg 131.12.31.79/backup/121201.cfg
Parameters source-file-url — The location of the source file or directory to be copied.
dest-file-url — The destination of the copied file or directory.
Values <file-url> : <local-url>|<remote-url> - [255 chars max]
local-url - [<cflash-id>/ |<usb-flash-id>/][<file-path>]
remote-url - [{ftp://|tftp://}<login>:<pswd>@
<remote-locn>/][<file-path>]
remote-locn - [ <hostname> | <ipv4-address> |
"["<ipv6-address>"]" ]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id - cf1:, cf2:\ (only on 7210 SAS-T)
usb-flash-id - uf1:
force — Forces an immediate copy of the specified file(s).
Values <file-url> : <local-url>|<remote-url> - [255 chars max]
local-url - [<cflash-id>/][<file-path>]
remote-url - [{ftp://|tftp://}<login>:<pswd>@
<remote-locn>/][<file-path>]
remote-locn - [ <hostname> | <ipv4-address> |
"["<ipv6-address>"]" ]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id - cf1:, cf2:\ (only on 7210 SAS-T)
usb-flash-id - uf1:
file copy force executes the command without displaying a user prompt message.