File Management Commands
Page 182 7210 SAS M, T, X, R6 Basic System Configuration
Note: This parameter is not available in the BOF for 7210 SAS-M 24F, 7210 SAS-X, 7210 SAS-T
and 7210 SAS-R6 devices.
Note: It is recommended not to connect the ports configured as no-service-ports to another device.
Parameters port-id — Identifies the ports in the system using the notation Chassis/slot/port-number. For example,
1/1/1 – refers to front panel fixed port #1 on the chassis, and 1/2/1 – refers to the port #1 on the 2
x 10G MDA inserted into the system.
To Next Page
Loading...
Need help?
General
