Alcatel-Lucent 7210 SAS M Configuration Guide

System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 335
group-up
Syntax [no] group-up time in seconds
Context config>system>oper-group>hold-time
Description This command configures the number of seconds to wait before notifying clients monitoring this
group when its operational status transitions from up to down.
The no form sets the values back to the default.
Default 4
Parameters time in seconds —
Values [0..3600]

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English