System Alarm Commands
Page 350 7210 SAS M, T, X, R6 Basic System Configuration
Guide
rmon
Syntax rmon
Context config>system>thresholds
Description This command creates the context to configure generic RMON alarms and events.
Generic RMON alarms can be created on any SNMP object-ID that is valid for RMON monitoring
(for example, an integer-based datatype).
The configuration of an event controls the generation and notification of threshold crossing events
configured with the alarm command.
thresholds
Syntax thresholds
Context config>system
Description This command enables the context to configure monitoring thresholds.
To Next Page
Loading...
