Alcatel-Lucent 7210 SAS M Configuration Guide

Date and Time Commands
Page 374 7210 SAS M, T, X, R6 Basic System Configuration
Guide
daily
Syntax daily start start-time-of-day end end-time-of-day
no daily start start-time-of-day
Context config>cron>time-range
Description This command configures the start and end of a schedule for every day of the week. To configure a
daily time-range across midnight, use a combination of two entries. An entry that starts at hour zero
will take over from an entry that ends at hour 24.
The no form of the command removes the daily time parameters from the configuration.
Parameters start-time-of-day — Specifies the starting time for the time range.
Values Syntax: hh:mm
hh 0 — 23
mm 0 — 59
end-time-of-day — Specifies the ending time for the time range.
Values Syntax: hh:mm
hh 0 — 24
mm 0 — 59
weekdays
Syntax weekdays start start-time-of-day end end-time-of-day
no weekdays start start-time-of-day
Context config>cron>time-range
Description This command configures the start and end of a weekday schedule.
The no form of the command removes the weekday parameters from the configuration.
Parameters start-time-of-day — Specifies the starting time for the time range.
Values Syntax: hh:mm
hh 0 — 23
mm 0 — 59
end-time-of-day — Specifies the ending time for the time range.
Values Syntax: hh:mm
hh 0 — 24
mm 0 — 59

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English