System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 399
Syntax [no] trigger-alarm-msg {alarm-msg-text}
Context config>system>alarm-contact-input alarm-contact-input-id
Description This command allows the user to configure a text message for use along with SNMP trap and Log
message that are sent when the system generates an alarm. The system generates a default message if
the message is not configured. The system does not generate a trap or log if no form of the command
is enabled.
Default None
Parameters alarm-msg-text — A printable character string, up to 160 characters in length.
To Next Page
Loading...
