Alcatel-Lucent 7210 SAS M - Page 416

LLDP System Commands
Page 416 7210 SAS M, T, X, R6 Basic System Configuration
Guide
tx-hold-multiplier
Syntax tx-hold-multiplier multiplier
no tx-hold-multiplier
Context config>system>lldp
Description This command configures the multiplier of the tx-interval.
Parameters multiplier — Specifies the multiplier of the tx-interval.
Values 2 — 10
Default 4
tx-interval
Syntax tx-interval interval
no tx-interval
Context config>system>lldp
Description This command configures the LLDP transmit interval time.
Parameters interval — Specifies the LLDP transmit interval time.
Values 5 —32768
Default 30