System Commands
Page 450 7210 SAS M, T, X, R6 Basic System Configuration Guide
Sample Output
*A:Redundancy# show cron action run-history terminated
===============================================================================
CRON Action Run History
===============================================================================
Action "test"
Owner "TiMOS CLI"
-------------------------------------------------------------------------------
Script Run #17
-------------------------------------------------------------------------------
Start time : 2006/11/06 20:30:09 End time : 2006/11/06 20:35:24
Elapsed time : 0d 00:05:15 Lifetime : 0d 00:00:00
State : terminated Run exit code : noError
Result time : 2006/11/06 20:35:24 Keep history : 0d 00:49:57
Error time : never
Results file : ftp://*:*@192.168.15.18/home/testlab_bgp/cron/_20061106-203008.
out
Run exit : Success
-------------------------------------------------------------------------------
Script Run #18
-------------------------------------------------------------------------------
Start time : 2006/11/06 20:35:24 End time : 2006/11/06 20:40:40
Elapsed time : 0d 00:05:16 Lifetime : 0d 00:00:00
State : terminated Run exit code : noError
Result time : 2006/11/06 20:40:40 Keep history : 0d 00:55:13
Error time : never
Results file : ftp://*:*@192.168.15.18/home/testlab_bgp/cron/_20061106-203523.
out
Run exit : Success
Script source
location
Displays the location of scheduled script.
Max running
allowed
Displays the maximum number of allowed sessions.
Max completed run
histories
Displays the maximum number of sessions previously run.
Max lifetime
allowed
Displays the maximum amount of time the script may run.
Completed run
histories
Displays the number of completed sessions.
Executing run
histories
Displays the number of sessions in the process of executing.
Initializing run
histories
Displays the number of sessions ready to run/queued but not exe-
cuted.
Max time run his-
tory saved
Displays the maximum amount of time to keep the results from a
script run.
Last change
Displays the system time a change was made to the configuration.
Label Description (Continued)